Invalid Destination - Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
DID Trunks
Console Display/Instructions
Continue to specify type for the other trunk block or go to Step 8.

Select .
Next
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select twice.
Exit

Invalid Destination

Use this procedure to specify where to direct outside calls (received on DID
trunks) for unassigned extension numbers. Calls can be either directed to a
backup position (normally the primary system operator) or given a fast busy
signal. See
assigning a backup position.
Summary: Invalid Destination
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
''QCC Operator to Receive Call Types''
System Manager
Hybrid/PBX
Not required
Form 3d, incoming Trunks: DID
Backup (calls are sent to the primary system operator)
Backup, Fast Busy
No
No
LinesTrunks
Extension
Return to Step 6. The next block will be
displayed on Line 1.
4
in
4
DID InvalDstn
or
Return Fast Busy
or
June 1997
Page 4-141
Chapter 3 for information on
Send to Backup
Enter Exit Exit
Issue 1
PC