Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 225

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Telephones
Console Display/Instructions
Save your entry. Then, continue to copy button assignments

or go to Step 5.
Select
Enter
Select
Next.
Return to the System Programming menu.

Select twice.
Exit
Analog Multiline Telephone Without Built-in
Speakerphone (BIS) or Hands Free Answer
Intercom (HFAI) Capability
Use this procedure to identify analog multiline telephones with flat membrane
buttons that do not have BIS or HFAI capability. The models that must be
identified are 5-Button, 10-Button, 34-Button, and 34-Button Deluxe analog
multiline models with flat membrane buttons.
Keep the factory setting for analog multiline models with raised plastic buttons,
including the following models: 10-Button HFAI, 34-Button with speakerphone
(SP-34), 34-Button with speakerphone and display (SP-34D), BIS-10, BIS-22,
BIS-34, BIS-22D, and BIS-34D.
This procedure is not necessary for MLX or single-line telephones.
Summary: Analog Multiline Telephones Without
BIS or HFAI Capability
Programmable by
Mode
Idle Condition
or
System Manager
All
Not required
Additional Information
After selecting
Enter
to copy button assignments from the
extension displayed on Line 1 to addi-
tional extensions.
After selecting
Next
ton assignments from the next sequen-
tial extension.
Return to Step 3 to continue program-
ming. The extension to be copied from
will be displayed on Line 1.
3
3
June 1997
Page 3-71
, you may continue
, you may copy but-
Issue 1
PC