Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 201

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
QCC Optional Features
Console Display/Instructions
Select Queued Call.

System Operator:
Make a selection
Positions
Queued Call
_
Hold Timer
DLC Hold
Exit
Select Message Center.

Queued Call Operator:
Make a selection
Hold Rtrn
HoldRelease
Threshold
ElvatePrior
Exit
Specify the QCC operator extension.

Operator Message Center:
Enter QCC operator
extension number
Backspace
Exit
Assign or remove the extension as a message center.

Select
Enter
Delete
Return to the System Programming menu.

Select three times.
Exit
>
InQue Alert
Call Types
Msg Center
ExtndComplt
Return Ring
Delete
Enter
or
.
Additional Information
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required.
On = extension is message center position.
Flashing = extension is not message
center position.
Off = extension is not an operator position.
You may continue to assign or remove
extensions as a message center by
repeating Steps 4 and 5.
Issue 1
June 1997
Page 3-47
PC
Ã