Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 267

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Optional Telephone Features
Console Procedure
PC Procedure
Group Coverage Ring Delay
The Group Cover Ring Delay option replaces the Delay Ring Interval programmed
on a systemwide basis in releases prior to Release 4.1.
Use this procedure to specify the following
The number of rings before sending calls to Group Coverage when the
sender does not have Primary or Secondary Coverage or the receivers are
not available, and the Group Coverage receiver is either a Calling Group
only or the QCC queue only (no Group Cover buttons on multiline
telephones).
The number of rings in addition to the Primary Cover Ring delay before
sending calls to Group Coverage when the sender has Primary or
Secondary Coverage and the receivers are available.
The Group Coverage Ring Delay is programmed for each sender's extension.
Summary: Group Coverage Ring Delay
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
More
Extensions
Delay Secondary
Dial no. of rings (1–6)
extension Type no. of rings (1–6)
System Manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
3 rings
More
Cover
Dial sender's extension
Enter Exit
Type sender's
3
3
Issue 1
June 1997
Page 3-113
Enter