Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 756

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Night Service
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Night Service with Time Set
Use this procedure to specify the time of day and the days of the week when Night
Service is to be activated and deactivated.
Enter the time of day as 4 digits, using 24-hour notation. Enter the day of the week
as a single digit (0 to 6), with 0 being Sunday. If you enter an invalid number, the
system truncates the number.
If you change the system time while Night Service is active, Night Service is
deactivated automatically and you must manually reactivate it.
Operators can override the timer and turn Night Service on and off manually. This
feature can be deactivated when out-of-the-ordinary situations occur (for
example, a midweek holiday).
NOTE: NOTE: NOTE:
For Release 2.1 and earlier, after setting Start and Stop time for Night
Service the current day of the week for Night Service must be set using the
following procedure.
NightSrvce
If system programming information is being loaded into memory from a backup
diskette, the current day of the week must be reset.
Night Service can be turned off by using the following procedure:
NightSrvce
No password
4 digits (any combination of 0 to 9)
Yes (Exclusion List)
No
NightSrvce OutRestrict
password
Enter
no. Drop
Enter
no.
Enter ExcludeList
Enter Exit
item no.
no.
Dial the current day of the week
Day of Week
Dial
Day of Week
Drop
Dial item
Emergency
Dial telephone
Dial ext. no.
Exit
+ Type password
+ Type telephone
Type ext. no.
4
9 Enter Exit
Issue 1
June 1997
Page 4-349
Dial
Type
Enter Exit