Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 371

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Night Service
Console/Display Instructions
Return to the System Programming menu.

Select .
Exit
Activate/Deactivate Night Service Procedure
Turn Night Service On or Off.

Night Serv Time Control:
Select one
On
Off
Exit
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select .
Exit
Night Service with Coverage Control
Use this procedure to enable or disable the Night Service Coverage Control
option to automatically control the status of programmed Coverage VMS Off
buttons.
When the Coverage Control option is enabled, a transition into Night Service
(either by pressing a Night Service button or automatically by the Time Set
option) automatically deactivates the VMS Coverage Off (Release 2.0 or later)
buttons (LED is off) and allows outside calls to go to VMS Coverage at night.
When the system is taken out of Night Service (either by pressing a Night
Service button or automatically by the Time Set option), programmed VMS
Coverage Off buttons are activated (LED is on) and outside calls are prevented
from going to VMS Coverage during the day.
When the Coverage Control option is disabled, Night Service status has no effect
on programmed VMS Coverage Off buttons.
Additional Information
Select On to turn Night Service on.
Select Off to turn Night Service off.
Enter
3
Issue 1
June 1997
Page 3-217
PC