Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 701

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
System Features
In Hybrid/PBX mode, if a trunk assigned to ring into the QCC queue is also used
for shared remote access, perform the procedure below before you perform the
"QCC Operator to Receive Calls" procedure.
NOTE: NOTE: NOTE:
A loop start line/trunk must be programmed for Reliable Disconnect if it is to
be used for remote access (see "Disconnect Signaling Reliablility").
Summary: Remote Access Trunk Assignment
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Remote Access Trunk Assignment
Console/Display Instructions
Select the Lines and Trunks menu.

System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
System Manager
All
Not required
Form 3a, Incoming Trunks: Remote Access
Remote Access is not assigned
Dedicated, Shared, No Remote
Yes
No
LinesTrunks
line/trunk no.
used
Enter
trunk is used
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
4
RemoteAccss LinesTrunks
Specify how trunk is
Enter
Exit Exit
Type line/trunk no.
4
Issue 1
June 1997
Page 4-294
Dial
Specify how
PC