Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 178

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
System Operator Positions
Console Display/Instructions
Specify the DLC extension as a DLC position.

DLC Operator Positions:
Enter extension
Store All
Backspace
Exit
Assign or remove the DLC operator extension.

Select
Enter
.
Delete
Indicate that you have finished entering all positions.

Select
Store All
Delete
Enter
or
.
Additional Information
If no DSS is attached:
SP: "Entering an Extension"
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 6.
On = extension is currently assigned
Flashing = extension can be assigned as
a DLC position.
Off = extension cannot be assigned as a
DLC position.
You may continue to assign or remove
DLC operator positions by repeating
Steps 4 and 5.
The session is terminated, and the
system restarts. You must enter system
programming again to continue.
Issue 1
June 1997
Page 3-24
PC
Ã