Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 125

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Using SPM
Type the IS II/III password and press

Password:
Type for the terminal emulation type and press
ams

Unix disk usage
information
Term=
If you are working with IS II, the IS II main menu appears.
If you are working with IS III, the system prompts you for your login
registration. After you enter your login and press
menu appears.
To exit from IS II/III programming, press

The system prompts you for confirmation that you want to exit. After confirmation
the following message appears.
Returning to SPM
Password
The Password option is used by qualified service personnel to change the modem
connection password. A password is always required to establish a connection
with the built-in modem. The password always consists of seven characters. You
can perform remote system programming only if you enter the password correctly.
A default password is set at the factory. You must obtain this password from your
system consultant (SC).
Follow the steps below to change the modem connection password.
.
.
, the IS III main
( ).
Exit
2
Issue 1
June 1997
Page 2-41