Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 575

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
PRI Facilities
Console Display/Instructions
Enter the slot number in the control unit that contains the 100D module

( nn = 1 to 17).
PRI Test Telephone Num:
Enter slot number (1-17)
Backspace
Exit
Save your entry.

Select .
Enter
Erase the current test telephone number ( N ).

Slot xx Test Tel Number:
Enter test number
N
Backspace
Exit
Enter a telephone number of up to 12 digits to be assigned as

the test number to the 100D module ( N = any combination of 0 to 9).
Dial or type [ N ].
Continue to assign the test telephone number to another

100D module or go to Step 9.
Select .
Next
Save your entry.

Select .
Enter
Return to the System Programming menu.

Select twice.
Exit
Additional Information
Dial or type [ nn ].
Enter
xx = number entered in Step 4
Next
Press Drop.
Enter
Return to Step 6. The next slot will be
displayed on Line 1.
Issue 1
June 1997
Page 4-168
PC
Ã
+
Ã