Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 443

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Lines and Trunks
Console/Display Instructions
Return to the System Programming menu.

Select .
Exit
Second Dial Tone Timer
Use this procedure to program the second dial tone timer. The second dial tone
timer sets a delay in providing a dial tone after a star code is dialed to obtain
special services from the central office. See the Feature Reference for information
about programming the second dial tone timer to prevent toll fraud. The second
dial tone timer is available only in Release 3.1 and later.
Summary: Second Dial Tone Timer
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Second Dial Tone Timer
Console Display/Instructions
Select the Options menu.

System Programming:
Make a selection
System
SysRenumber
Operator
LinesTrunks
Exit
Additional Information
System Manager
All
Not required
Form 8a, System Features
0 ms.
0–5000 ms, increments of 200 ms.
No
No
More
Options
timer value
value
Additional Information
>
Extensions
Options
Tables
AuxEquip
NightSrvce
4
4
Drop
SecDT
Enter Exit
+ type second dial tone timer
4
Issue 1
June 1997
Page 4-36
PC
dial second dial tone
PC