Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 100

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
2 Programming with SPM
Accessing SPM
Press any key to display the SPM Main Menu shown below.

SPM Main Menu
Menu: Select Function
Sys Program
Backup
Boards
Print Opts
Monitor
If the SPM Main Menu does not appear or if the information on the screen
is garbled, press any key again.
If the COM Port (communications port) screen appears instead of the SPM
Main Menu, it indicates that the SPM software has not been initialized. See
''Initializing the SPM
To select an option, press the function key that corresponds to the option you

want. For example, to select
With a Local or Remote Modem Connection
The method you use to access SPM by modem depends on whether you are
programming on site (locally) or from a remote location.
If you are on site, the modem must be connected to an 012 or 016 module
on the control unit. To establish a connection to the control unit's internal
modem, dial
If you are at a remote location, do one of the following:
Considerations
Review the following items before you begin the modem connection procedure.
Maintenance
Restore
Pass-Thru
Password
Language
NOTE:
The function keys shown on either side of the display are included
here for quick reference. See
PC keys in SPM.
Software''.
Language
.
*10
— Place a call to the system on a Remote Access line, enter the barrier
code (if required), and dial the code for the internal modem (
— Place a voice call to the system using the line to which the modem is
connected and ask the operator to transfer you to the modem (by
pressing Transfer, dialing
When you hear the modem answer tone, switch to data mode.
''SPM Screens''
press .
2
, then hanging up the telephone).
*10
2
Issue 1
June 1997
Page 2-16
for details on using the
).
*10