Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 655

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Telephones
Forced Account Code Entry
Use this procedure to assign or remove Forced Account Code Entry. When this
feature is programmed on individual telephones, the user must enter a 1- to
16-digit account code before making an outside call.
Summary: Forced Account Code Entry
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Microphone Operation
Use this procedure to enable or disable microphones on MLX telephones (except
QCC operator positions). When the microphone is disabled, users cannot use the
speakerphone to conduct conversations.
NOTE: NOTE: NOTE:
The microphone cannot be disabled on analog multiline telephones or on
MLX telephones used as QCC operator positions.
System Manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Station
Data Form 1b, 7500B Data Station
Not assigned
Assigned, not assigned
Yes
No
Extensions Account
no.
Enter Exit
Toggle letter
no.
4
4
Toggle LED On/Off or Dial ext.
Exit
On/Off or Type ext.
R
4
Issue 1
June 1997
Page 4-248