Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 631

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Telephones
Valid Entries
Inspect
Copy Option
Conole Procedure To program extension:
PC Procedure
All Modes. System Access Ring (Hybrid/PBX mode) or
Intercom Ring (Key and Behind Switch modes), System
Access Voice (Hybrid/PBX mode) or Intercom Voice (Key
and Behind Switch modes), and the first 18 through 29 lines
connected to the control unit are assigned to all DLC operator
positions. The number of lines assigned depends on the type
of telephone used as a DLC operator position. Refer to the
appropriate telephone planning form for details.
Not applicable
Yes: specific button options
Yes. (You can copy additional SA buttons to another
extension, but you cannot overwrite SA buttons that are
already assigned.)
More
Cntr-Prg
no.
Enter Start
extension Enter
To copy extension programming:
More
Cntr-Prg
no. Dial copy to ext. no.
Enter
To program extension:
Type ext. no.
extension
To copy extension programming:
Type copy from ext. no.
copy to ext. no.
Dial ext.
Program Ext.
Program
Exit Exit
Copy ext. Dial copy from ext.
Enter
Issue 1
June 1997
Page 4-224
Exit Exit
Program
Type