Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 302

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
3 Common Administrative Procedures
Optional Group Calling Features
Console/Display Instructions
Return to the System Programming menu.

Select three times.
Exit
Group Calling Message-Waiting Indicator
Use this procedure to designate the extension that will receive message-waiting
indications (MWIs) for the calling group.
Only one extension can be designated as a message-waiting receiver for each
calling group; however, more than one calling group can use the same
message-waiting receiver. The extension assigned as a message-waiting receiver
does not have to be a member of the calling group.
Message-waiting indications cannot be sent to the extension assigned to the
group unless this option is programmed. The message-waiting receiver cannot
distinguish between messages left for the calling group and personal messages.
Summary: Group Calling Message-Waiting
Indicator
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Additional Information
System Manager
All
Not required
Form 7d, Group Calling
No message-waiting receiver assigned
Extension number
No
No
More
Extensions
group ext. no.
Enter
receiver
Enter Exit
no. Type ext. no. for MWI receiver
3
3
Grp Calling Message
Dial ext. no. for MWI
Exit
Type calling group ext.
Issue 1
June 1997
Page 3-148
PC
Dial calling