Lucent Technologies MERLIN LEGEND Release 5.0 System Programming Manual page 646

MERLIN LEGEND Communications System Release 5.0
System Programming 555-650-111
4 Programming Procedures
Telephones
Summary: CTI Link
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: CTI Link
System Manager
Hybrid/PBX
Not required
(See Form 2b)
No port programmed as CTI link
Any extension on an MLX port board except the System Pro-
gramming console port and the first and fifth ports.
Yes
No
Busy out the board first:*
Menu
Maintenance
no.
Enter Busy-Out
* This is a Maintenance step. Start the procedure from the
main menu, not the System Programming screen.
Program the CTI Link:
AuxEquip CTI Link
ber
Enter Exit
Restore the slot:*
Menu
Maintenance
no.
Enter Restore
* This is a Maintenance step. Start the procedure from the
main menu, not the System Programming screen.
Busy out the board first:
Type the slot no.
Program the CTI Link:
Type extension number
Restore the slot:*
Dial the slot no.
* This is a Maintenance step. Start the procedure from the
main menu, not the System Programming screen.
4
Dial the slot
Slot
Yes
Dial extension num-
Exit
Dial the slot
Slot
Yes
Issue 1
June 1997
Page 4-239