Avaya Octel 200 Installation And Maintenance Manual page 639

15. When the copy process is
completed, power off the system
16. Remove the source drive.
17. Replace the source drive with
the destination drive.
18. If a drive was removed in step 5,
replace the drive in its original
slot.
19. Power on the system.
20. Log on to the system.
21. Disable the write protect
22. Verify correct system operation.
PB60019−01
.
The command used in step 2 to write protect the source drive,
automatically write protects the destination drive.
Disable the write protect on what was the destination drive, that is the
drive used to replace the original source drive.
Procedures 12-51
Octel 200/300 S.4.1