Executing Commands - Avaya Octel 200 Installation And Maintenance Manual

Keys on the
telephone key pad
and all terminals
Executing
commands
Octel 200/300
prompts
Notes
The I&M Manual's Volumes and Chapters
Volume 4 — Installation
and Maintenance
INSTALL
Hardware
Preparing the Phone System
Installation
Reports
Maintenance Commands
LOG Commands
System Errors and Traffic Pegs
Hardware Replacement
DTIC Card
LAN Card
Procedures
PB60019−01
Keys that are entered from a telephone key pad or terminal function
keys are represented within a box.
An example of a telephone key pad entry is:
An example of a key on a terminal is:
Execute commands by pressing either the
key, depending on which key is available on the terminal.
used throughout this manual and is interchangeable with
When text represents a prompt spoken by the Octel 200/300, it is
printed in italics and enclosed in quotes.
"Thank you. Just a moment."
This is the format for a note.
Please refer to the Configuration volume, User Table chapter.
.
Volume 5 — Integration
Standard DTMF Integration
Adaptive Integration
Enhanced DTMF In-band Integration
Centrex SMDI/SMSI
NEC NEAX-2400
Northern Telecom SL-1
AT&T (ATTIC Integration)
Definity G3
System 75/Definity G1
System 85/Definity G2
ROLM
CBX
9751 Model 30/80
Cortelco Millenium
Mitel
SX-200 Digital
SX-200/SX-100 Analog
SX-2000
Meridian 1
AT&T APIC Integration
Definity G3
System 75/Definity G1
System 85/Definity G2
Northern Telecom NPIC
MD110 Adaptive Integration
DPNSS Integration
ISDN Integration
QSIG Integration
9
Escape
key or the
Return Enter
Enter
.
Return
Volume 6 — Networking
Networking
Analog Networking
Protocol 1 and 3 − Voicenet
Protocol 2
Protocol 4 − AMIS
Protocol 5 − OctelNet
Collocated Analog Networking
Digital Networking (Remote and
Domain)
Network Name Confirmation
Route Table
Location Table
Numbering Plan Table
Network Schedule Table
Configuration Forms
Octel 200/300
is
S.4.1