Avaya Octel 200 Installation And Maintenance Manual page 467

5. Install the 10BaseT, RJ45 adapter on the back of the cabinet, for the slot in which the LAN card is
being installed.
6. After servicing the LAN card, use the Courtesy Up command to put the card into service. At the @
prompt, enter
CU x
In this command, x is the slot number.
7. Test the message server for correct operation.
8. Close and lock the door to the cabinet.
Figure 9-10 shows the eight LEDs on the front edge of the LAN card.
PB60019−01
Enter
Figure 9-10 LED Placement on the LAN Card
Hardware Replacement 9-17
1
2
3
5
4
6 7
8
Octel 200/300 S.4.1