Avaya Octel 200 Installation And Maintenance Manual page 328

Hide thumbs Also See for Octel 200:

Table of Contents

Installation and Maintenance Volume

Example of LAN Channel Number

In this example, the start time (S) is specified as 00 4 21, and the type of filter (PR, for port) is

specified as 101. This example displays all log entries for activities on LAN channel 1, and it shows

message number 10B3 sent to number F68.

Specify Print Option(s):

"S"tart <time>, "E"nd <time>, "L"ine <length>, "P"age <length> "\"

"C"ontinuous

Filters: PR TY EV AU MB MS SL UN LI SO D1 D2 D3 D4 D5

>s 00 4 21 pr 101

MM/DD/YY HH:MM:SS PRT TYPE

D1 D2 D3 D4 D5

04/21/00 07:23:27 L01 LAN_OUT CONNGRANT

04/21/00 07:23:27 L01 LAN_IN

04/21/00 07:23:27 L01 LAN_OUT STATUS

04/21/00 07:23:27 L01 LAN_IN

04/21/00 07:23:27 L01 LAN_OUT STRTSND

04/21/00 07:23:27 L01 LAN_OUT DESTMBX

04/21/00 07:23:27 L01 LAN_IN

04/21/00 07:23:27 L01 LAN_MSG CREATE

04/21/00 07:23:28 L01 LAN_OUT STATUS

04/21/00 07:23:28 L01 LAN_MSG RCV

04/21/00 07:23:29 L01 LAN_IN

LOG for Protocol 5 (OctelNet)

You can use the LOG command for tracing various events for Protocol 5 (OctelNet) networking. The

applicable events are provided in Appendix A at the end of this chapter.

The following example uses the LOG PR CPT command for OctelNet information. The start time (S) is

specified as 00 02 09, and the type of filter (TY) is specified as ONT. This example displays all log

entries that start with ONT in the TYPE column.

Octel 200/300

MBX/EXTN MSG# SL U L SOURCE

Chapters

Table of Contents