Table of Contents
Advertisement
6-26
Installation and Maintenance Volume
DOWN Entry
INITIALIZING
Entry
DOWN Entry
At any time during the listing of the LAN status, you can press
line or two.
Status of FINDMBOX
Use the command FINDMBOX to search for a mailbox in the local USER Table, local Network Names
Table, and Uniform Numbering Plan Domain. The command then prints a status message of the results of
each search. Refer to Table 6-1 for a list of the status messages.
Octel 200/300
S.4.1
The LAN is running normally. If a Courtesy Down is in progress, the message
COURTESY DOWN IN PROGRESS is shown.
When the LAN status is UP, the high-speed link status is given for each high-speed
digital location, as follows.
The location name.
LOCATION
-
The status of the link to this location, which is either UP or
STATUS
-
DOWN.
The Digital Networking Protocol level of the other system.
LAN-PRTCL
-
This entry allows compatibility with future releases. It does
not relate to analog protocol numbering.
The entry in this column can be one of the following:
OTHER
-
HNDSHAKE, waiting for start-up handshake reply;
OEM-FAIL, cannot establish connection, OEM mismatch.
The LAN is in the initialization process. The current status of the initialization
process is given, from among the following:
WAITING FOR LAN-REBUILD TO COMPLETE
-
WAITING FOR LAN TO START
-
WAITING FOR LAN INFO FROM VCU
-
STARTING HIGH-SPEED CONNECTIONS
-
Communication to the LAN is not UP, and no LAN activity is possible. The reason,
if known, is given. The following are possible reasons:
System does not have the Digital Networking feature.
-
A COURTESY-DOWN is in process.
-
LAN SYSTEM PARAMETER NOT ENABLED.
-
LAN BOARD NOT CONFIGURED IN SLOTS TABLE.
-
to terminate the listing within a
Escape
PB60019−01
Advertisement
Chapters
Table of Contents
