Avaya Octel 200 Installation And Maintenance Manual page 30

1-2 Installation and Maintenance Volume
INSTALL Questions
1.
a)
Manufacturer
Model
b)
Installation name
c)
System ID number
e)
Alarm number
f)
Forward string
Cancel forward string
g)
Minimum length for
security codes
h)
Default mailbox security code
2.
MBX,EXT,COS or
MBX,COS (if mbx = ext)
3.
Card, Port, Ext, COS, Mode, Outcall, Test
4.
NETWORK ROUTES
Route, Drop, Access
5. NETWORK LOCATION
Location Name, Protocol, Digital Networking
NETWORK NUMBERING
6.
Location Name, Access,
Figure 1-1 Order of Questions and Associated Tables in the INSTALL Program
Octel 200/300 S.4.1
SP 3a
SP 3b
SP 1
SP 2
SP 31
SP 45
SP 46
SP 144
SP 105
USER
SLOTS
Additional Digits
For each manufacturer and model, specific
System Parameters (noted as SP in chart) are
supplied from the Serenade database. These
vary, depending upon the telephone system and
installation. A few examples follow:
FLASH TIME, ms.
TRANSFER INIT
reconnect−RNA
reconnect−BUSY
transfer complete
ALTERNATE XFER
reconnect−RNA
reconnect−BUSY
transfer complete
PBX INIT CODE
You must include intercept mailboxes needed to
configure port COSs (used in the SLOTS Table) and
user mailboxes needed for testing. You can configure
additional mailboxes during INSTALL, or wait until the
basic installation is tested and then complete the system
database using the UPDATE program. Mailboxes that
need to be configured in INSTALL or UPDATE
include: all company greeting mailboxes, intercept
mailboxes, distribution-list pilot numbers, extended
mailboxes (pilot and members), flexible menu
mailboxes, and system users (mailboxes with extensions
and mailboxes only).
Enter the COS, even if you have not assigned the
correct attributes. Attributes can be added or
deleted in the UPDATE program.
SP 9
SP 13
SP 16
SP 33
PB60019−01