Avaya Octel 200 Installation And Maintenance Manual page 54

1-26 Installation and Maintenance Volume
Some PBX systems may require a digit sequence to be dialed so that system
extensions get assigned to the incoming call group.
What digits, if any, should be dialed on all PORTS upon POWER−UP?
(May include: 0−9,*,#, D=DELAY, E=EXPECT DIAL TONE, or F=FLASH,
1−8 chars, Empty line = E)
:
End of telephone system specific questions.
At this point, the INSTALL program continues with question 1.b), Company Name. Refer to the
Answering Questions in INSTALL section.
Octel 200/300 S.4.1 PB60019−01