Using The Log Pr Cpt Command - Avaya Octel 200 Installation And Maintenance Manual

Hide thumbs Also See for Octel 200:

Table of Contents

Installation and Maintenance Volume

Enter start time : Year Month Day Hour Minute or C (continuous)

Option 7: Aplink Activity

Select 7 to display Works for Serenade system activity. The activities displayed are:

LOST. The data link between the Octel 200/300 CPU and the Works for Serenade system is down.

SYNC. The data link is restored.

Using the LOG PR CPT Command

The LOG PR CPT command displays the same activities as are filtered with LIST TRACE.

With the LOG PR CPT command, different combinations of print options and filters can be specified to

consolidate information and focus the display on specific types of trace activities. Use LOG PR CPT to

do the following:

Set filter for records with FAX_CHN and FAX_MSG.

Set start and end times for any trace.

Review timing and sequence of all high-level communication to and from the LAN for Digital

To use the LOG command for CPT activities, at the @ prompt, enter:

Specify Print Option(s):

"S"tart <time>, "E"nd <time>, "L"ine <length>, "p"age <length> "\"

"C"ontinuous

Filters: PR TY EV AU MB MS SL UN LI SO D1 D2 D3 D4 D5

Refer to the Log Command section for an explanation of LOG print options.

Octel 200/300

040 INTG_C FWD_INT

041 INTG_C DIR_EXT

040 INTG_C ONHOOK

043 INTG_C FWD_EXT

MBX/EXTN MSG# SL U L SOURCE

NO_ANSWER 4334

Table of Contents