Avaya Octel 200 Installation And Maintenance Manual page 546

Hide thumbs Also See for Octel 200:

Table of Contents

Installation and Maintenance Volume

This is an example of a ping failure:

@CMD LAN PING 157.156.53.5

LAN (Ethernet) Link: MM/DD/YYYY 12:48:20 (0179fc76:0179fc76) Rev 1.0.3

Current Time: 04/12/2000 15:15:49 @ Slot 10

LAN>PING 157.156.53.5: 56 data bytes

still trying...

157.156.53.5 not responding

LANSTAT Command

The LANSTAT command provides basic information about the current LAN status. Information about

the LAN status for previous periods is provided in the Network Traffic Report for Digital Networks.

Refer to the Reports chapter in this volume.

The LANSTAT command provides information about the current status: whether the LAN is UP or

DOWN and the state of the high-speed links. Following is an example of the screen for LANSTAT.

LAN STATUS: UP

LAST INITIALIZED ON MM/DD/YY AT 06:05 PM

DIGITAL NETWORKING STATUS:

−−−−−−−− HIGH−SPEED−LINK STATUS −−−−−−−−−−−−−−−−

−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

GWL STATUS: DOWN − GATEWAY LINK SYSTEM PARAMETER IS NOT ENABLED

The LAN status is always UP, INITIALIZING, or DOWN, as follow.

Octel 200/300

Chapters

Table of Contents