Avaya Octel 200 Installation And Maintenance Manual page 397

Table 8-2 Hardware Error Types and Remedies (continued)
Error Type:Name
23:PBX Integration
24:PBX Integration
The DATA-1 field specifies the type of error. DATA-2 through DATA-4 are data
associated with the error.
DATA-1 = ERROR CODE:
01 =
02 =
03 =
04 =
05 =
PB60019−01
Source
Problem with the Check the RS-232C connections. If error
RS-232C link with repeats, contact your technical support
PBX center.
Problem with the This error pertains only to certain
integration card or integrated message server. The following
RS-232C integration outlines the probable cause and suggested
remedy for that error, depending upon the
DATA fields.
ERROR IN OPENING CODE FILE H:LIC:
There is no code in the message server for the integration card.
Call your technical support center.
REMEDY:
ERROR DOWNLOADING FILE, DISK ERROR WHILE READING
H:LIC:
Call your technical support center.
REMEDY:
LIC WAS BUSY WHEN IT SHOULDN'T HAVE BEEN
The integration card was not able to accept commands to it
because it was busy.
Reset the integration card. If the error persists call your
REMEDY:
technical support center.
LIC REPORTED BAD DIAGNOSTIC BYTE:
During the code download procedure or normal operation, the
integration card reported an error through its diagnostic byte.
DATA-2 = DIAGNOSTIC BYTE
DATA-3 = NOT USED
DATA-4 = STATE OF LIC TASK WHEN ERROR OCCURRED
Clear the Hardware Error Table. If the error persists, call
REMEDY:
your technical support center.
LIC REPORT LINK STATUS ERROR
The digit display telephone line to the integration card is not
working.
DATA-2 = LINK NUMBER HAVING ERROR
DATA-3 = LINK STATUS
DATA-4 = STATE OF LIC TASK WHEN ERROR OCCURRED
Check the PBX status on the line if DATA-3 = 03 or
REMEDY:
check the wiring or PBX hardware if DATA-3 = 04.
System Errors and Traffic Pegs
Remedy
Octel 200/300
8-11
Priority
2
2
S.4.1