Avaya Octel 200 Installation And Maintenance Manual page 527

Hide thumbs Also See for Octel 200:

Table of Contents

SEQUENCER PC*

CLOCK MASTER

CLOCK ACTIVE

* A Sequencer PC is a virtual software entity (like a little computer) that has its own task to perform on a specific part of the card's

software. For example, there is a separate Sequencer PC for keeping track of the health of each port.

Following is the port status for port 1:

−−−−− Channel 01 Status −−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−

CHANNEL STATE:

SEQUENCER PC:

The port status indicates that code 1111 is being sent. This code occurs because the card is down and the

DTIC is not ready to receive a call from the PBX. The SEQUENCER PC status 0f indicates that the port

is waiting to be told to operate. Generally, 0f means down. The following gives basic information about

the fields for the status of a port (channel).

Channel Status − ALL — State of the Card

Possible values

Value from 00 to ff (hex) Informational only − for use by Avaya

Card is ready for traffic.

Card is not ready for traffic.

The CARD STATE should agree with the

Traffic field under the TRANSMIT section

of the trunk status.

Engineering.

DTIC enabled as clock master.

DTIC not enabled as clock master.

A good clock is being received from the

A good clock is not being received from the

Octel 200/300

Chapters

Table of Contents