Alarm Test - Avaya Octel 200 Installation And Maintenance Manual

Hide thumbs Also See for Octel 200:
Table of Contents

Advertisement

Port State
Abbreviation
OMR
OMS
QAD
QCK
PAC
PDL
QS1
QS2
RDY
RNM
SCR
SLQ
STA
STR
TST
VMR
VMS
WFA
WFD
XPR
5KI

Alarm Test

The TEST ALARM command tests the alarm callout feature. At the @ prompt, enter:
TE A
The message server attempts to call the string configured in System Parameter 31 — ALARM
NUMBER. If successful, the person answering the alarm call hears a message similar to the following:
"Beep-Beep-Beep-Beep. This is an alarm call from message server number 123. Error type O has
occurred. Press star to acknowledge alarm notification or press pound to connect to the modem."
If not acknowledged, the message server disconnects the call after 1 minute and retries it every 10
minutes, until it is acknowledged (the listener presses
To log on for remote access, proceed as follows:
1. Press
terminal.
2. Press
.
If the person answering the alarm call does not enter a second
and continues to retry every 10 minutes, until the call is acknowledged.
PB60019−01
Table 6-2 Abbreviations for Channel/Port State (continued)
Description
OCTELNET MESSAGE RECEIVE
OCTELNET MESSAGE SEND
COLLECTING AN ADDRESS FOR A QUICK MESSAGE
RECORDING A QUICK MESSAGE OR MESSAGE AFTER CALL
PERSONAL ASSISTANCE CONFIGURATION
PERSONAL DISTRIBUTION LISTS
QSIG TRANSFER IN PROGRESS − STATE 1
QSIG TRANSFER COMPLETION − STATE 2
WAITING FOR COMMAND AT READY
USER RECORD OWN NAME
SCRIPTED GREETING
SELECT MESSAGE QUEUE
START COMMAND PROCESSING
START OF INITIAL LOGON BEFORE READY
SELFTEST IN PROGRESS OR PORT HAS FAILED SELFTEST
NET MESSAGE RECEIVED - PROTOCOL 2
NET MESSAGE SEND - PROTOCOL 2
WAITING FOR MAILBOX ADDRESS AFTER RECEIVING #
WAITING FOR FIRST DIGIT AFTER ANSWERING CALL
TRANSPARENCY STATE FOR DPNSS/qsig (path replacement is in progress)
VMX 5000 USER INTERFACE
Enter
. The line Beeps for up to 3 minutes, which allows time to connect the modem and the
#
when ready. This connects the modem, which enables remote access to the Octel 200/300.
#
Maintenance Commands
).
*
, the server disconnects the call
#
6-39
Octel 200/300
S.4.1

Advertisement

Table of Contents
loading

Table of Contents