Table of Contents
Advertisement
Quick Reference Guide
Command
Subject
Type
Miscellaneous
Integration Unit
Commands
(continued)
LAN Status
Languages
LAN Channel Status
Call Detail Record,
Call Processing and
Moves, Adds,
Changes Trace
Internal Modem
Incoming Call
Records
PB60019−01
Command
Information
Gives the current status of an integration unit.
ISTAT x y
x = slot number
y = unit number
Displays the languages installed. This command
LANG
lists the settings for a specific language. These
settings can be modified; however, some settings
require a special set of prompts. The settings that
can be modified are listed in this chapter.
For Digital Networking, gives basic information
LANSTAT
about the current status of the LAN, including
whether the LAN is UP or DOWN and the state of
the high-speed links.
For Digital Networking, displays the status of LAN
LCSTAT
channels. The status of all LAN channels, a
specific LAN channel, or a range can be specified.
Collects detailed information about specific events
LOG x y
for these activities: Call Processing Trace, Call
Detail Record log, Moves, Adds and Changes log,
and Server Activity Trace log.
x = specific filter for data collected
y = the log to be traced
Blocks access to Octel 200/300 via internal
MOD DISABLE
modem.
Restores access to the Octel 200/300 via the
MOD ENABLE
internal modem.
Used to monitor incoming call records over the
MON2
RS-232C link (port 2). To exit the monitor mode,
press
Show call record data in hexadecimal values as it is
MON2 H
sent by the PBX.
Examines each mailbox to determine whether its
MWL RECALC
message waiting lamp should be ON or OFF.
Octel 200/300
Maintenance Commands
.
Escape
Octel 200/300
S.4.1
Advertisement
Chapters
Table of Contents
