Suppress Telnet Echo Option; Telnet Close Option - Neoware c50 - Thin Client User Manual

Closed Telnet Session Exits TeemTalk
Resource: xteemx340*tnExit: on
Command Line: -tnexit
Default Setting: off (message box displayed)
When a telnet session is closed, TeemTalk normally displays a message box giving
you the option to reconnect, cancel or exit. These commands enable you to cause
TeemTalk to be exited immediately when the telnet session is closed. See the Telnet
Close Option section also.

Suppress Telnet Echo Option

Resource: xteemx340*telnetSuppressEcho: on
Command Line: -tnsuppressecho
Default Setting: off
This command will suppress TeemTalk generation of the telnet echo option on
connection.
Suppress Telnet 3270 Regime Option
Resource: xteemx340*telnetSuppressRegime: on
Command Line: -tnsuppressregime
Default Setting: off
This command will suppress TeemTalk support for the telnet "3270 regime" option.

Telnet Close Option

Resource: xteemx340*tnClose: 0-3
Command Line: -tnclose 0-3
Default Setting: 0
This command specifies the action to be taken when a telnet session is closed (if
-tnexit is not specified). The possible settings are as follows:
0
1
2
3
This will also be effective for telnet connection failure.
Resources & Command Line Options
Display message box for option required.
Exit TeemTalk.
Reconnect automatically to the same host.
Cancel telnet connection only.
25-17