Kermit Remote Operations - Neoware c50 - Thin Client User Manual

File Transfer

Kermit Remote Operations

When Kermit is selected as the transfer protocol, the Remote button in the Initiate
File Transfer dialog box provides access to commands that enable you to perform
various operations on the host. Kermit has to be operating in server mode on the host
for remote commands to function. A command is initiated by selecting it in the
Remote Operations dialog box then clicking OK.
Most commands will cause a dialog box to be displayed in which you have to enter
information, though if the OK button is not initially dimmed then the information is
not essential. A window will display the results of commands. If the results are
extensive, an Edit window will display them, enabling you to edit and even transfer
them to another application.
Get
This will display a dialog box in which you specify the name of a file to be obtained
from the host.
Command
This enables you to specify a command which is to be executed by the host. The
command must be entered using a valid syntax for the host.
22-17