Neoware c50 - Thin Client User Manual page 135

Setup Menus
WPRT Attribute
Factory default: Dim
This option applies to all emulations and enables you to specify the appearance of
write-protected characters on the display. They can be displayed in reverse video,
dimmed or blinking. The WY-50+ and WY-60 emulations also support the underline
and invisible attributes.
Multiple Page
Factory default: Unselected
This option applies to the WY-50+, WY-60 and all the TVI emulations. It determines
whether or not more than one page of display memory can be accessed. When selected,
all pages will be accessible. See also the Auto Page option.
Note that the TVI emulations support two pages of 24 lines each when this and the
Auto Page options are selected, regardless of the Lines and Page Size settings.
80/132 Clears
Factory default: Unselected
This option applies to the WY-50+ and WY-60 emulations and determines whether or
not data is cleared from the display when the number of columns is changed. The
screen is always cleared when the number of columns is changed in the other
emulations.
Economy 80
Factory default: Unselected
This option applies to the WY-50+ and WY-60 emulations and enables 80 column
display with more pages of display memory.
Auto Scroll
Factory default: Selected
This option applies to all emulations and determines what happens when the cursor is
moved beyond the last line of the current page.
When selected, the displayed data scrolls up and the cursor remains on the last line.
When unselected, the cursor moves to the top of the same page.
Auto Page
Factory default: Unselected
This option applies to the WY-50+, WY-60 and all the TVI emulations. It
determines what happens when the cursor reaches the top or bottom of the page.
When unselected, the cursor either moves to the top of the same page or data scrolls up
from the bottom, as determined by the setting of the Auto Scroll option.
8-61