Bq 3107 Option; Hp 700-92/96 Option; Ibm 3151 Option; Ibm 3270 Options - Neoware c50 - Thin Client User Manual

The High Function Terminal option is displayed when the AIXTerm emulation is
selected. This enables you to switch between HFT (High Function Terminal) mode
(default) and VT100 mode.

BQ 3107 Option

The VIP Mode option enables you to set the VIP mode to 7700 or 7760.

HP 700-92/96 Option

The HP Model option specifies what is reported back to the host in response to a
terminal identification request. This can be set to 70092 (default), 2392A, 2622A,
70094 or 70096. (Not all features of the specified terminal may be supported.)

IBM 3151 Option

The setting of the IBM 3151 Model option identifies the terminal model being
emulated in response to a terminal identification request from the host. Model 11
supports only one viewport containing 24 or 25 rows and 80 columns. Model 31
supports up to three viewports (80 or 132 columns wide) and pass-through printing.

IBM 3270 Options

The setting of the IBM 3270 Model option specifies what is reported back to the host
in response to a terminal identification request. (Note that not all features of the
specified terminal may be supported.) TN3287 printing is supported by selecting
3287-1.
One of four display sizes can be selected:
3278 settings with the E extension provide support for the following extended
attributes (these are supported by the 3279 as standard):
The setting of the Left Ctrl acts as Reset Key option determines whether or not the
left Control key performs the same function as the Reset key.
3278/9-2 24 rows by 80 columns
3278/9-3 32 rows by 80 columns
3278/9-4 43 rows by 80 columns
3278/9-5 27 rows by 132 columns
3270 Field Attributes
Extended Highlighting
Foreground Colour
Query Reply Inbound Structured Fields
Getting Started
2-7