Bq 3107 Settings - Neoware c50 - Thin Client User Manual

Setup Menus

BQ 3107 Settings

This dialog box is displayed by selecting BQ 3107 in the Settings menu.
Rendition Mode
Factory default: VIP
The setting of this option determines whether VIP or SDP display attributes are used.
VIP Mode
Factory default: 7760
The VIP mode can be set to 7700 or 7760.
Partition 0
Factory default: Message Row
The display is divided into two partitions numbered 0 and 1. Partition 0 is a single line
that can be used to display status reports and messages either at the bottom or top of
the display, as determined by the setting of the Message Row option. Partition 1 is a
page of 24 lines. The setting of this option determines whether Partition 0 is Blank or
used as a Message Row.
8-68