Neoware c50 - Thin Client User Manual page 143

Setup Menus
Message Row
Factory default: At Row 25
The setting of this option determines whether the message row (Partition 0) is at the
top or bottom of the display.
Fill Character
Factory default: Asterix
When inserting or deleting characters, the setting of this option determines whether a
Space or Asterisk character is displayed.
Transmit Terminator
Factory default: ETX
This specifies the last character that is sent to indicate the end of a block transmission.
The character can be ETX, EOT or CR.
Blink Displayed As
Factory default: Caret
In VIP mode the start of a flashing field can be indicated by a caret or space character.
Blank Displayed As
Factory default: Tilde
In VIP mode the start of a blank field can be indicated by a tilde or space character.
Operating Mode
Factory default: Block
In Block mode, keyboard entered data is displayed and processed locally, allowing
you to edit it before a block of data is sent to the host. In Character mode, keyboard
entered data is sent simultaneously to the host and the display.
At Page Overflow
Factory default: Stop
The setting of this option determines what happens when the cursor reaches the bottom
of the screen. Selecting Stop will cause the cursor to stop at the last position. Scroll
will cause the display to shift up one line and move the cursor to the new last line,
while Wrap will move the cursor to the top of the screen.
Auto Tabbing
Factory default: Selected
When an unprotected field is filled, the setting of this option determines whether or not
the cursor automatically moves to the next field.
8-69