Neoware c50 - Thin Client User Manual page 37

Getting Started
other options in this dialog box only apply if TeemTalk is to communicate with a host
via an RS232 serial port.
If TeemTalk is to communicate to a host via the serial port, you must set the baud rate,
stop bits, parity and flow protocol to match that of the host to which you will be
communicating. The Transmit Rate option enables you to specify the maximum
effective baud rate that TeemTalk transmits at. This is used to artificially reduce data
rates on higher baud rate interfaces.
When the options are set correctly, click Ok to make the changes take effect and
close the dialog box. To save the settings so that they will be automatically reasserted
when TeemTalk is subsequently reset or loaded, display the File menu and select the
Save Settings option.
3-5