Receiving Files - Neoware c50 - Thin Client User Manual

Receiving Files

The following procedure is used to transfer files from the host to your workstation.
1. Start the transfer procedure on the host computer and specify that
files are to be sent.
2. Display the TeemTalk File menu on your workstation and select
File Transfer... The Initiate File Transfer dialog box will be
displayed (as shown in the previous section).
3. Select the Transfer Protocol that you wish to use.
4. If you wish to change the default parameter settings for the
chosen transfer protocol, click the relevant Parameters button
and make your selections in the displayed dialog box then click
OK. See the following sections for details.
Note: If the file transfer fails it is probably because of differences
between the local and remote parity and the word size.
5. If you wish to specify a different local directory for received files,
click the Local button and specify the local directory path in the
Local Change Directory dialog box, then click OK.
6. Click the Receive button in the Initiate File Transfer dialog box.
Note: The program will wait for the arrival of one or more files
from the host.
7. Click the Start button. If you selected the XMODEM or
XMODEM-1K protocol, a dialog box will be displayed in which
you specify the name of the file to be received. All the other
protocols do not require this as the filename is provided by the
sender.
When the transfer begins, a window will be displayed indicating
the status of the file transfer. On completion of the transfer, or if
the transfer is cancelled, an audible tone will sound and appropri-
ate messages will be displayed.
Note: With XMODEM, YMODEM Batch and ZMODEM, you can
use the Remote Command option in the ZModem
Parameters dialog box to automatically start the host end.
File Transfer
22-5