Soft Buttons; Mouse Cursor Style; Deactivate Dec Status Line - Neoware c50 - Thin Client User Manual

Deactivate DEC Status Line

Resource: xteemx340*activeStatusline: on/off
Command Line: -as
+as
Default Setting: on
These commands enable you to specify whether or not the user can change terminal
settings using the DEC status line. The status line is active (i.e. the user can change
terminal settings) by default.

Soft Buttons

Resource: xteemx340*buttonLevels: 0-4
Command Line: -bl 0-4
Default Setting: 1
These commands specify how many levels of soft buttons are displayed at the bottom
of the TeemTalk window. A level consists of two rows of soft buttons with six
programmable buttons on each row. All levels are accessible even if not all are
displayed. Levels stored off-screen can be 'scrolled' into view by clicking the Level
button. A maximum of 8 rows (48 programmable buttons) can be displayed by
specifying 4. Specifying 0 will cause no soft buttons to be displayed.
Text Cursor Style
Resource: xteemx340*staticCursor: 0-4
Command Line: -sc 0-4
Default Setting: Static block cursor
These commands determine how the text cursor is displayed in the TeemTalk window.
The parameter can have one of the following values:
0 Underline Flashing
1 Block Flashing

Mouse Cursor Style

Resource: xteemx340*mouseCursor: integer/value
Command Line: -mc integer/value
Default Setting: Depends on the UNIX system
These commands enable you to specify the style of the mouse cursor displayed by
default in the TeemTalk window. The integer/value depends on the UNIX system.
Resources & Command Line Options
on
off
2 Underline Static
3 Block Static
4 Hidden
25-25