Neoware c50 - Thin Client User Manual page 125

Setup Menus
When unselected, the character set for the keyboard nationality specified in the Mode
Settings dialog box is mapped to G0, the default character set mode (as indicated on
the status line). In effect, national characters from the Additional character set are
swapped with Standard (ASCII) characters to form the National set mapped to G0, so
the Additional set contains the missing ASCII characters. This means that you can still
generate the full range of ASCII and Additional characters by using the Char Set
function (refer to the PT250 Emulation chapter for details).
When this option is selected, both ASCII and Additional characters are available,
enabling characters from any keyboard nationality to be generated.
Truncate At End Of Line
Factory default: Unselected
This option determines what happens to received characters when the rightmost col-
umn of the display is reached. When unselected, on reaching the end of the line, the
next character will be placed in the first column of the following line. When selected,
following characters will not be displayed.
Screen Format
Factory default: 80x24
The setting of this option determines the display memory format, the number of lines
and columns that are displayed, and the amount of data transmitted to the host when
the emulation is in Block mode (as determined by the setting of the Block Mode op-
tion in this dialog box).
Selecting 80x24 will enable 24 rows of 80 columns to be displayed at the same time.
In Block mode, this specifies 1-page mode transmission.
Selecting 80x48 will enable 80 columns by 24 rows to be displayed, while another 24
rows are stored off-screen in the display buffer. These may be scrolled into view using
the scroll bar. In Block mode, this specifies 2-page mode transmission.
Selecting 132x27 will enable 27 rows of 132 columns to be displayed at the same
time, useful for spreadsheets. In Block mode, this specifies 1-page mode transmission.
Selecting 80x25 will enable 25 rows of 80 columns to be displayed at the same time.
In Block mode, this specifies 1-page mode transmission.
Screen Wrap
Factory default: Unselected
When screen wrap is selected, display memory is treated in a circular fashion. When
the cursor reaches the last line it will automatically wrap to the first line again, and vice
versa.
When screen wrap is unselected, the cursor will not move above the first line or below
the last line.
8-51