Hp700/92 Settings - Neoware c50 - Thin Client User Manual

Setup Menus

HP700/92 Settings

This dialog box is displayed by selecting HP 70092 in the Settings menu.
Local Echo
Factory default: Unselected
The setting of this option determines whether or not keyboard entered characters are
displayed on the screen as well as sent to the host.
When unselected, characters are not displayed when they are transmitted to the host
unless the host 'echoes' them back.
ENQ/ACK Pacing
Factory default: Selected
The setting of this option determines whether the Hewlett-Packard ENQ/ACK hand-
shake is used or not.
When selected, the host can send an ASCII ENQ (enquiry) control code at the end of
transmission asking if the data has been processed, to which TeemTalk will reply by
sending an ACKnowledge code when it has. Note that this form of handshaking has
the lowest priority after hardware and XON/XOFF handshaking.
8-45