Neoware c50 - Thin Client User Manual page 183

Terminal Test - F5
When this button or F5 key is pressed, the HP700/92 emulation will perform a self-test
and display a test screen showing all the displayable characters.
Memory Lock - F6
This enables data to be locked on the display so that it is not scrolled off the top of the
window when display memory is full. Once enabled, it can only be disabled if this
button or F6 key is pressed again, a reset is performed, or the emulation is exited.
Placing the cursor on the first line and enabling Memory Lock will prevent data from
automatically scrolling off the top of the display when display memory is full.
Instead, the message 'MEMORY FULL Press RETURN to clear' will be displayed.
You may use the cursor keys to edit data already displayed. To disable the Memory
Lock and continue entering new data, press F6 or click the button again and position
the cursor immediately below the last line.
The Memory Lock function may also be used to lock a specific number of lines from
the top of the display, leaving the remaining lines to scroll past them. This is useful
when you want column headings or instructions to remain on the display. To lock a
specific number of lines, place the cursor on the last line to be locked and press F6 or
click the button. The lines from the top of the display down to the cursor line will
now be locked.
Note: You can edit data contained in locked lines but if new data
is inserted it may cause data on the last line of the locked
region to be pushed down into the scrolling region.
Display Functions - F7
This button and the F7 key toggles the Display Functions mode on or off. The effect
of activating Display Functions mode depends on whether the emulation is in Local
or Remote mode.
In Local mode, activating Display Functions mode will cause subsequently received
control codes and escape sequences to be displayed on the screen but not actioned.
Exceptions to this rule are the commands issued when the button or F7 key is pressed
and the carriage return and line feed commands, which will be executed.
In Remote mode, activating Display Functions mode will cause subsequently
received control codes and escape sequences to be transmitted to the host but not
actioned locally. Exceptions to this rule are the commands issued when the button or
F7 key is pressed and the carriage return and line feed commands, which will be
executed. If the Local Echo option is enabled in the HP70092 Settings dialog box
(see the Setup Menus chapter), commands will be displayed on the screen as well as
transmitted to the host.
HP700/92 Emulation
12-7