Bq 3107 Emulation; Introduction; The Status Bar - Neoware c50 - Thin Client User Manual

This chapter describes the Bull BQ 3107 terminal emulation.

Introduction

To run the Bull BQ 3107 terminal emulation, display the Emulation Settings dialog
box from the Settings menu and set the Alpha Emulation to BQ 3107, then click
OK.

The Status Bar

The status bar displayed along the bottom of the window will show the status of
various operations.
Field 1: This will always display RUN, indiocating that the line shown corre-
sponds to normal operation.
Field 2: Indicates whether you are in Block or Character mode. In Block mode,
keyboard entered data is displayed and processed locally, allowing you to
edit it before a block of data is sent to the host. In Character mode,
keyboard entered data is sent simultaneously to the host and the display.
You can change the mode using the Operating Mode option in the BQ
3107 Settings dialog box.
Field 3: This will display a bell symbol when the terminal emulation receives a
BEL command from the host or when the user has pressed the wrong
key.
Field 4: Not used.
Field 5: Displays ERR when an error is detected.
Field 6: Displays BSY when the host is busy processing data. The keyboard will
be locked when this is displayed.

BQ 3107 Emulation

BQ 3107 Emulation
10
10-1