Vt/Ansi/Sco Settings - Neoware c50 - Thin Client User Manual

Setup Menus

VT/ANSI/SCO Settings

This dialog box is displayed by selecting VT/ANSI/SCO in the Settings menu. The
options available depend on the emulation you are running.
Status Line
Factory default: Indicator
The last line in the window can be used to display a status line when running any of
the DEC VT terminal emulations. An indicator status line is displayed by default on
the 25th line the first time you load TeemTalk.
You may choose not to display a status line, or enable a host-writable status line to be
displayed instead. The type of status line displayed is determined by the setting of this
option.
Page Layout
Factory default: Continuous
When TeemTalk is in VT420 mode (Alpha Emulation set to VT400 and Terminal
ID set to VT420), the display memory of 144 lines can be divided into several pages,
up to a maximum of six pages of 24 lines each. The setting of this option determines
the number of lines on a page and therefore how many pages are available. When the
worksapce is smaller than the page, you can scroll the page up or down in the window
by holding down the Ctrl key and pressing the Up or Down Cursor keys. When
TeemTalk is in any mode other than VT420, the page size is the same as the display
memory (Continuous).
8-41