Neoware c50 - Thin Client User Manual page 274

File Transfer
Retry Delay
Factory default: 0
This specifies the period of time in milliseconds that the protocol will wait for a packet
to be transferred before trying again. The protocol will be exited if the number of
retries exceeds that specified by the Max Retries option. The valid range is 0 - 65535.
Timeout
Factory default: 10000
This specifies the length of time in milliseconds that the protocol will wait for a re-
sponse from the remote host before generating an error message. The valid range is 1
- 65535.
Max Retries
Factory default: 5
This setting specifies the maximum number of retries that will be performed before
the protocol is exited. The valid range is 0 - 65535.
Packet Depth
Factory default: 3
This specifies the number of packets to send or receive before requiring acknowl-
edgement. The valid range is 1 - 16.
Primary Extent
Factory default: 4
This sets the primary file extent for the file created on the host. The valid range is 1 -
32767.
Secondary Extent
Factory default: 16
This sets the secondary file extent for the file created on the host. The valid range is 1
- 32767.
22-16