Neoware c50 - Thin Client User Manual page 273

File Transfer
Print Translate
Factory default: Unselected
Not implemented in this version.
No Skip
Factory default: No
This option applies when File Direction is set to Print. When selected, this will pre-
vent the host from adding lines to the file that skip over page boundaries.
No Strip
Factory default: No
This option applies when File Direction is set to Print. The setting determines
whether or not the high bit from characters will be removed before they are printed. If
your printer cannot acccept 8-bit characters, make sure this option is not selected.
Wait
Factory default: No
Not implemented in this version.
Transfer Type
Factory default: Normal
This enables you to specify the transfer type.
Selecting Normal will enable a file to be transferred as long as a file with the same
name does not already exist at the destination, which will result in an error.
Selecting Append will cause the data contained in the file being transferred to be
appended to the named target file.
Selecting Erase will cause the target file to be deleted before the file is transferred
Selecting Purge will cause the target file to be overwritten.
Debug
Factory default: 0
This sets the debug level for the trace file. Only use this when instructed to do so by
Neoware UK Ltd. The valid range is 0 - 9.
Record Length
Factory default: 132
This specifies the length of records in text files. The valid range is 1 - 4096.
22-15