Ibm 3151 Emulation; Introduction; The Status Line - Neoware c50 - Thin Client User Manual

This chapter describes features of the IBM 3151 terminal emulation.

Introduction

The optional IBM 3151 emulation is based on the native mode of the IBM 3151
Model 11 terminal. You can run the emulation by displaying the Emulation Settings
dialog box from the Settings menu and setting the Alpha Emulation option to IBM
3151. Click Ok to close the dialog box and TeemTalk will be in IBM 3151 mode. The
emulation is configured via the IBM 3151 Settings dialog box which is described in
the Setup Menus chapter.
The display is set to 24 rows by 80 columns by default, but you can select one of four
display formats from the IBM 3151 Settings dialog box:
A status line (also known as the operator information area) is displayed at the bottom
of the window. This displays various messages as described in the next section.

The Status Line

The last line in the window is used to display a status line consisting of eight fields
which show the status of various operations. Status line information can be turned on
or off by pressing the Msg key. The following illustration shows the information that
is displayed in the status line by default.

IBM 3151 Emulation

24 rows x 80 columns
25 rows x 80 columns
24 rows x 132 columns
25 rows x 132 columns
IBM 3151 Emulation
15
15-1