Display Format - Neoware c50 - Thin Client User Manual

Resources & Command Line Options

Display Format

Icon File Name
Resource:
Command Line: -icon filename
Default Setting: Not applicable
These commands enable you to specify the name of the file containing the icon that
is displayed when TeemTalk is iconized. The icon file must be in standard X11 bitmap
format. The colour of the icon can be specified using an escape sequence as de-
scribed in the last section of the Command Summary appendix.
Start TeemTalk As An Icon
Resource:
Command Line: -iconic
Default Setting: Not applicable
This command line option will cause TeemTalk to be displayed as an icon when
loaded, instead of the usual window.
TeemTalk Icon Display Location
Resource:
Command Line: -iconGeometry =±x±y
Default Setting: Location determined by the window manager
These commands enable you to specify where the TeemTalk icon is displayed on the
screen. The x and y values are pixel offsets. A positive offset will position the left or
top edge of the icon a specified pixel distance from the left or top edge of the display,
while a negative offset will position the right or bottom edge of the icon a specified
pixel distance from the right or bottom edge of the display.
25-18
xteemx340*iconFile: filename
None
xteemx340*iconGeometry: ±x±y