Neoware c50 - Thin Client User Manual page 192

HP700/92 Emulation
label for the key, for example, Under in the first field and Line in the second for
Under Line. Press Tab to move down to the next line. Press F7 to enable Display
Functions mode then press Ctrl + [ together or the Esc key, followed by the charac-
ters &d and the attribute character, which for underline is D.
The key definition should look like this if the F1 key was defined to enable the
underline attribute:
For any other attribute or combination of attributes, substitute the last character in the
second line (D in the example above) with the relevant character from the following
table.
Half-Brightness
Underline
Inverse Video
Flashing
Invisible
End Attribute
When you have finished assigning character attribute commands to f-keys, press F9
to exit from the User Key Definition menu then F10 to enable the User Keys and
display the defined attribute labels.
12-16
@ A B C D E F G H I J K L M N O S