Sending Files - Neoware c50 - Thin Client User Manual

Sending Files

The following procedure is used to transfer files from your workstation to the host.
1. Start the transfer procedure on the host computer and specify that
files are to be received.
2. Display the TeemTalk File menu on your workstation and select
File Transfer... The Initiate File Transfer dialog box will be
displayed.
3. Select the Transfer Protocol that you wish to use.
4. If you wish to change the default parameter settings for the
chosen transfer protocol, click the relevant Parameters button
and make your selections in the displayed dialog box then click
OK. See the section entitled Setting Protocol Parameters later in
this chapter for details.
Note: If the file transfer fails it is probably because of differences
between the local and remote parity and the word size.
5. Click the Send button.
6. Click the Start button to display the Send File dialog box.
File Transfer
22-3