Viewdata Mode - Neoware c50 - Thin Client User Manual

Graphics Emulations
The 4010/4014 emulation enables you to run applications written for the Tektronix
4010 and 4014 terminals.
The Regis emulation enables you to run applications written for the DEC VT340
terminal in ReGIS mode.
The VT640 emulation enables you to run applications written for the Retrographics
VT640 terminal.
The Westward 2119 emulation enables you to run applications written for the
Westward 2119 terminal.

Viewdata Mode

TeemTalk enables you to select one of three display formats for viewdata mode: 40
column, 80 column, or Split Screen. Selecting Viewdata 40 or Viewdata 80 mode
will enable a single viewdata page of 40 or 80 columns wide by 24 lines deep to be
displayed.
Viewdata Split enables simultaneous display of two pages side by side, each page
consisting of 24 lines and 40 columns. Receipt of a clear screen command will move
the cursor to the home position of the opposite page and its contents will be erased
ready for the next page.
The keys mapped as PF1 through PF4 have the following functions in viewdata
mode:
PF1:
PF2:
AT&T 4410 Emulation
In AT&T 4410 mode the display size is 80 (or 132) columns by 25 lines with a scroll
region of 24 lines. A row of function buttons is displayed along the bottom of the
window. These correspond to the function keys F1 through F8 on the keyboard.
You can action a programmed function either by pressing the function key or click-ing
the equivalent button displayed on the screen. The middle button will toggle display of
the soft buttons on and off when clicked.
To program the function keys, press any F1 - F8 key shifted. The Program Function
Keys menu will be displayed.
Each line relates to one particular function key and its button. The two fields
following the f-key number allow you to enter a two line label of up to sixteen
* PF3: Reveal
# PF4: Exit to ANSI mode
Getting Started
3-9